Konica Minolta Printgroove - Manual (Page 180)

Editing Document 5
Printgroove POD Ready 5-62
5.20 Color Identification
You can switch On and Off of the function of color identification.
The function of color identification makes Printgroove POD Ready distin-
guish pages in the document are colored or monochrome.
2
Note
– You can also distinguish colored page and monochrome page by
icon displayed in [Document ]sheet of [Document Panel].
To use function of color identification, follow these steps:
1
Select [Document] - [Color Identification] menu.
By selecting, the function of color identification can be alternately On
and Off.
– When [Color Identification] is On and the file added to [Document
Panel], colored pages are shown by the colored page icons and
monochrome pages are shown by the monochrome page icons.
– When [Color Identification] is Off and the file added to [Document
Panel], each page shown by the icon means “without identifica-
tion”.
2
Note
– When there is no check mark in front of [Color Identification], click
[Color Identification] to select the check mark and start this func-
tion.
– When there is a check mark in front of [Color Identification], click
[Color Identification] to clear the check mark and stop this function.
– When [Color Identification] is changed from OFF to ON, color iden-
tification is not done about the page that has been already regis-
tered.