Konica Minolta bizhub C353 - Manual (Page 20)

C353/C253/C203 1-7
Overview of printer functions 1
1.3 Setting up the system
In order to use this printing system, it must first be set up.
The setup procedure refers to a series of steps for connecting this machine to a computer and installing the
printer driver on the computer.
The setup procedure consists of the following steps.
1.3.1 Network connection
1
Connect this machine to a computer.
2
Make sure the computer is connected to the network.
3
Specify the IP address of the machine to connect it to the network.
4
Depending on the connection method and protocol, change the network settings of this machine.
– LPR: Enable LPD print in the LPD Setting screen.
– Port9100: Enable the RAW port number (9100 at default), in the TCP/IP Setting screen.
– SMB: Specify "Print Setting" in the SMB Setting screen.
– IPP/IPPS: Enable IPP print in the IPP Setting screen. For IPPS print, install the certificate in advance.
– Web Service Printing: Enable the print function in "Web Service Settings".
– Bonjour: Enable Bonjour in the Bonjour Setting screen.
– AppleTalk: Enable AppleTalk in the AppleTalk Setting screen.
5
Install the printer driver.
– Specify the network port of the printer driver according to the connection method and protocol.
6
Install the screen fonts.
– The CD-ROM contains the Latin TrueType fonts as screen fonts. The ScreenFont or Screen Fonts
folder in the CD-ROM contains the screen fonts.
– Install the screen fonts after adding the operating system standard fonts. For details, refer to Help
of the operating system.
– Macintosh fonts are compressed. Decompress them before installing.
1.3.2 Local connection
1
Connect this machine to a computer.
2
Install the printer driver.
3
Install the screen fonts.
– The CD-ROM contains the Latin TrueType fonts as screen fonts. The ScreenFont or Screen Fonts
folder in the CD-ROM contains the screen fonts.
– Install the screen fonts after adding the operating system standard fonts. For details, refer to Help
of the operating system.
2
Reminder
After installing the printer driver, perform test print to make sure that the connections are made
properly.
!
Detail
For details on applicable interfaces, refer to "Compatible interfaces" on page 1-6 .
For details on network settings, refer to the User’s Guide [Network Administrator].
The procedure for installing the printer driver differs depending on the connection method, operating
system of the computer, and printer driver. For details, refer to
"Precautions for installation" on
page 2-2 .