Konica Minolta bizhub C353 - Manual (Page 172)

C353/C253/C203 11-43
Function detail description 11
11.10 Banner paper printing function
By specifying the banner print settings on the control panel, allows you to print on the paper up to 47-1/4
inches (1,200 mm) feeded from the bypass tray.
In the following section, setting long paper and printing on it is referred to as banner paper printing.
11.10.1 Copy paper
Applicable paper
11.10.2 Printer drivers and supported operating systems
The following drivers support banner paper printing:
- Konica Minolta PCL Printer Driver (PCL driver)
- Konica Minolta PostScript Printer Driver (PS driver)
11.10.3 Setting up the printer driver
Specify the output paper size as a custom paper size.
1
Click the Basic tab.
2
Select "Custom Size" from "Original Size" or "Paper Size".
The Custom Size Settings dialog box appears.
3
Specify the length and the width of the custom paper size according to the selected measurement unit.
4
Specify the paper type.
– If necessary, specify the other settings.
5
Click the [OK] button.
2
Note
For the Konica Minolta PCL Printer Driver, custom size setting can also be preregistered on the Initial
Setting tab in the printer driver activated from the Windows "Printer" window ("Printers and Faxes" for
Windows XP/Server 2003).
Paper width Paper length Paper type
8-1/4 inch to 11-3/4
inches (210 mm to 297
mm) 18 inch to 47-1/4 inches
(457.3 mm to 1,200.0 mm) Thick paper 1, Thick paper 1 + Duplex 2nd Side, Thick
paper2, Thick paper2 + Duplex 2nd Side (33-3/4 Ib to 55-
3/4 lb (127 g/m
2 to 210 g/m 2 ))