Konica Minolta bizhub C353 - Manual (Page 16)

C353/C253/C203 1-3
Overview of printer functions 1
1.1.2 Printing flow
The following outlines the flow of operations for using this printing system as a printer.
The printer driver receives print commands from applications.
Data is transmitted to this machine over a USB interface when this machine is used via a USB connection,
or over an Ethernet interface (TCP/IP, IPX/SPX, or AppleTalk) when this machine is used via an Ethernet
connection. The data is then delivered from this machine to the printer controller, which performs image
rasterization (development of output characters and images to bitmap data). Finally, this data is printed from
this machine.
Original documents can be scanned in the copy function or network scan function while this machine is
operating as a printer. To use the copy functions, press the [Copy] key on the control panel.
When a print job is received during copying, the data is stored in the memory of this machine. When the
copying is completed, the print job is automatically printed.
Application
Printer driver
USB
Application
Printer driver
Machine
Printer controller
PS/PCL processing (rasterizing)
Print
Used with a USB
connection
Computer
Used with a network
connection
Ethernet (TCP/IP, IPX/SPX,
or AppleTalk)