RADWAG BALANCES 3Y SERIES - Manual (Page 89)

- 89 -
The set comprises:
1 Weighing pan with stand 7 Thermometer
2
Bottom weighing pan of
density determining kit for
solids
8 Thermometer handle
3 Flexible connector 9 Plunger
4 Top weighing pan of density
determining kit for solids
10 Beaker basis
5 Beaker 11 Additional stand for set of pans
or a plunger
6 Hook 12
Additional set of pans for
determining density of solids,
which density is lower than
density of water
CAUTION:
− Particular elements shall be stored in a respective box.
− Weighing pans and plunger shall not be put down onto the weighing bench,
it may result in damage of particular parts. If either weighing pan or plunger
is not to be used, it should be placed back on a hook.
20.2. Assembly
XA Balances AS Balances PS Balances
CAUTION:
If upon assembly the –NULL- message is shown than the set shall be loaded with weights
(12), the device shall be zeroed or tared. Thus prepared device may be used for density
estimation.