RADWAG BALANCES 3Y SERIES - Manual (Page 220)

- 220 -
Format: NB CR LF
Accessible responses:
NB_A_”x” CR LF - command understood, balance factory number is
given in response
NB_I CR LF - command understood but not accessible at this
moment
x – balance factory number (in between inverted comas)
Example
Command:
NB CR LF – give balance factory number
Response:
NB_A_”1234567” – balance factory number – ”1234567”
Lock balance keyboard
Format: K1 CR LF
Accessible responses:
K1_I CR LF - command understood but not accessible at this
moment
K1_OK CR LF - command completed
Command locks balance keyboard (motion sensors, touch panel) until it gets
unlocked either by K0 command or by switching the balance off.
Unlock balance keyboard
Format: K0 CR LF
Accessible responses:
K0_I CR LF - command understood but not accessible at this
moment
K0_OK CR LF - command completed
Start BEEP signal
The command activates BEEP signal for a specified time limit.
Format: BP_TIME
Accessible responses:
BP_OK – command completed, BEEP signal activated
BP_E” – incorrect format or lack of the parameter
BP_I – command understood but not accessible at this
moment
TIME – parameter, decimal value, determined time limit for the signal, given
in [ms]. Recommended range <50 ÷ 5000>.
If value greater than the valid one is given, the BEEP sound is activated for
the maximal available time limit.
Example