RADWAG BALANCES 3Y SERIES - Manual (Page 192)

- 192 -
31.1. Computer
Active connection between a balance and a computer is signalled by visible
pictogram
displayed in the upper bar of the main window. Submenu <
Computer> enables configuring connection settings.
Procedure:
− press key and “ Peripheral devices / Computer” key
− set balance’s parameters related to cooperation with a computer
− computer port
o
available options: none, COM 1, COM 2, Tcp
− address
o
give address of a balance which is connected to a computer
− continuous transmission
o
available options: NO, YES (printout format depends on set
printout template in a balance – see next parameter).
− weighing printout template
o
it is possible to design an individual printout to a computer using a
dedicated window with printout template. Principles on creating
printouts are described in point 24.11 of this user manual.
− E2R System
o
E2R System is a modular system performing complex operations of
supervision and control over all weighing processes carried out on
a balance. On enabling the option, the processes carried out on
some of the databases are carried out only from the computer level
(mode not available in balance’s standard version).
Caution:
Enabling parameter <
E2R System> can only be carried out by balance
manufacturer or authorized personnel.
31.2. Printer
Balance submenu enables:
− Setting communication port with a printer,
− Defining printer’s code page, (default 1250)
− Defining controlling codes for PCL printer or EPSON label printer
CAUTION: codes must be entered in a hexadecimal form
− Defining printout standards
In order to ensure right cooperation of a balance with a printer (correct printout
of letters with diacritical signs specified for a given language), suitable speed of
transmission must be chosen for the balance, i.e. it must be respective to
transmission speed of a printer (see the printer settings). Additionally a given
printout code page must be accordant with the printer code page.
Code page accordance may be obtained as follows:
• by setting the right code page in the printer (see the printer manual) –
respective to printout code page set in a balance; or
• by sending control code from a balance to the printer, which automatically
sets the right code page (respective to code page set in a balance) in