RADWAG BALANCES 3Y SERIES - Manual (Page 61)

- 61 -
Settings 14.2.1.
Name
On entering this option, the display opens a message box
with keyboard. Insert name of a profile and accept it by
pressing key.
The name is assigned to the profile.
Default working mode
On entering this option the user can select a specific
working mode, which is set as default in a profile. In case
option is selected, then on selecting the profile, the
balance activates last used working mode.
Working modes 14.2.2.
On entering this option, the display opens a window containing all accessible
working modes. The user can introduce their settings to each of the working
modes which are activated on selecting a specific profile.
In each of the working modes, the user can change the following parameters:
 Settings
contain specific parameters relating to a working mode and universal
settings, such as: result control, tare mode, automatic footer printout,
printout mode, printout.
 Functions of quick access keys
declaring quick access keys, which are visible in the bottom display bar
 Information
declaring information which is visible in the grey coloured workspace
 Printout
declaring type of printout of defining a non-standard printout
Readout 14.2.3.
The function enables the user to adjust balance operation to ambient
conditions (filter settings) or individual user needs. Menu contains
the following elements:
FILTER
Each measurement signal before being displayed is electronically
processed for the purpose of obtaining corrected parameters
specific for stable measurement result, i.e. ready to read.