RADWAG BALANCES 3Y SERIES - Manual (Page 34)

- 34 -
Access level
Software of balances Y2 series provides four access levels: administrator,
advanced operator, operator and none (anonymous logging).
On switching on the balance, its display is constantly active, enabling carrying
out mass measuring processes. These measurements, however, cannot be
saved in balance’s database unless a user with at least minimal access level is
logged in. The minimal access level enables carrying out mass measuring
processes and saving them in balance’s databases using available function
keys.
Below table indicates access to editing user parameters, databases
and software functions depending on active access level.
Authorization Access level
None (guest) No access to editing all of user parameters.
it is not possible to accept a weighing record nor to start
a process.
No access to menu .
Operator Access to editing parameters in submenu:
Readout> and settings in group of parameters
, except for . The operator
can start and carry out all weighing processes, and has
access to and
preview data in . An operator can define
universal variables.
Advanced
operator
Access to editing parameters in submenu:
Readout>; ; ;
; except for .
The advanced operator can start and carry out all
weighing processes, and can erase old data from the
.
Administrator Access to all user parameters, functions and editing
databases.