RADWAG BALANCES 3Y SERIES - Manual (Page 175)

- 175 -
1. Product [name of a product which packaging is
checked for average tare determining
process]
2. Status [status (result) of a process]
3. Date [date of carried out process]
4. Tare [determined value of packaging tare]
5. S [average standard deviation]
6. 0,25 T1 [the value of a criterion for process
result]
7. No. of measurements [Number of completed measurements of
tare value]
8. User [name of a user carrying out the process]
9. Method [control method (internal criteria,
regulated by the act)]
29.10. Pipettes
Database of Pipettes contains records and specification on pipettes to be
calibrated.
Procedure
•
Enter submenu < Databases>, and press < Pipettes> field
•
Press < Add > soft key should a new pipette be added,
•
If a pipette already exists in the database of pipettes, press field with its
name to enter its specification which is optionally configurable.
List of parameters defined on a pipette:
1. Name
2. Code
3. Model
4. Tip
5. Type of volume
6. Nominal volume
7. Minimal volume
8. Number of channels
9. Type
10. Tested volumes