RADWAG BALANCES 3Y SERIES - Manual (Page 132)

- 132 -
The opened window contains the following data:
In case the following procedure is completed for a sample:
• weighing A only, then tare value is <0>,
• weighing T only, then value of weighing A is <0>
• weighing T+A, then for tare and weighing A the mass values are assigned.
Data on a weighed sample can be printed on a connected printer on pressing a
pictogram with a printer on display’s upper bar.
In order to preview data on weighing A, press field:
In case in a given series there are samples for which weighing of initial mass
(Weighing A) is already completed, it is possible to carry out final weighing
(weighing B) for these samples.
Weighing B
Select option:
On selecting the option, the balance moves to the first sample on the list,
for which weighing is not completed. If there are no such samples in a
series, the balance displays a message that such process is inaccessible. If
such process is possible, then new data on initiated process is displayed in
the grey coloured workspace.
Caution:
Description is accompanied by digits 1/3: <1> means, that
it is the 1 measuring cycle type B, and <3> means, that the
REPETITIONS> for this process is set to <3> (3 cycles).
Remember, that the software requests to carry out the cycle out