Kramer Electronics VS-1616D - Manual (Page 9)

Overview
5
5
• Ethernet over a LAN
• The infrared remote control transmitter
The VS-1616D is housed in a 19" rack-mountable enclosure.
To achieve the best performance:
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer VS-1616D in a
location free from moisture and away from excessive sunlight and dust
3.1 Recommendations for Best Performance
To achieve the best performance:
• Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
• Do not secure the cables in tight bundles or roll the slack into tight coils
• Avoid interference from neighboring electrical appliances and position your
VS-1616D away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
3.2 Safety Instructions
Caution: No operator serviceable parts inside the unit
Warning: You use only the power cord that is supplied with the
unit. Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
.
Warning: Disconnect the power and unplug the unit from the wall
before installing
3.1 Shielded Twisted Pair/Unshielded Twisted Pair
Kramer engineers have developed special twisted pair cables to best match our
digital twisted pair products; Kramer's BC-DGKat524, BC-DGKat623 and
BC-DGKat7a23 shielded twisted pair (STP) cables. These specially built cables
significantly outperform regular CAT 6 and CAT 7a cables.
!
!