Kramer Electronics VS-1616D - Manual (Page 19)

Connecting the VS-1616D 16x16 Digital Matrix Switcher
15
15
Figure 7: DGKat Card Serial Data Transmission
6.3 Audio Mode Selection on HDMI plus Audio Cards
The Option dip-switches 1 and 2 (see Table 6 ) control the way audio is handled.
Figure 8: Audio Mode Selection on HDMI plus Audio Cards
Table 6: Audio Mode DIP-switch Operation
DIP-
switch #
Description State Function
1 Auto/Manual
Mode
Off
(default)
Automatic—if an audio source is connected to the
3.5mm mini jack the analog (external) audio is
transmitted. If not, the embedded audio is transmitted
On Manual—DisplayPort and HDMI ports always transmit
the embedded audio and the VGA always transmits the
analog audio. The DVI port audio is defined by DIP-
switch 2
2 DVI Audio
Source
Off
(default)
Only the DVI uses the embedded audio
On Only the DVI uses the analog (external) audio
6.4 Connecting to the VS-1616D via RS-232
You can connect to the VS-1616D via an RS-232 connection using, for example, a
PC. Note that a null-modem adapter/connection is not required.