Kramer Electronics VS-1616D - Manual (Page 39)

Using the Configuration Menus
35
35
The following tables list the output port types and their relevant parameters
HDMI plus Analog Audio Output Card
Parameter Description Options
36.Reset SubBoard Re-power: power cycle the port
Factory default: perform a factory reset to default values of the port
Re-power
81.Volume Sets the audio output volume (0–100) 50
84.Audio Balance Sets the audio output channel balance (0–100) 50
87.Audio Bass Sets the audio outout bass level (0–100) 50
88.Audio Treble Sets the audio output treble level (0–100) 50
91.Audio Mute MUTE: mutes the audio output
Non-MUTE: unmutes the audio output
Non-MUTE
94.Audio Mix-Mode Close: Downscales the audio channels from 7.1 to 2 to the 3.mm mini
jack analog audio output
Open: Audio channels are not modified
Close
151.BLINK ON AUDIO 1: No video glitch when the audio is connected or disconnected
0: There is a video glitch when the audio is connected or
disconnected
1
HDMI plus S/PDIF Audio Output Card
Parameter Description Default
36.Reset SubBoard Re-power: power cycle the port
Factory default: perform a factory reset to default values of the port
Re-power
81.Volume Sets the audio output volume (0–100) 50
84.Audio Balance Sets the audio output channel balance (0–100) 50
87.Audio Bass Sets the audio outout bass level (0–100) 50
88.Audio Treble Sets the audio output treble level (0–100) 50
91.Audio Mute MUTE: mutes the audio output
Non-MUTE: unmutes the audio output
Non-MUTE
94.Audio Mix-Mode 50
151.BLINK ON AUDIO 1: No video glitch when the audio is connected or disconnected
0: There is a video glitch when the audio is connected or
disconnected
1
HDBaseT Output Card
Parameter Description Options
36.Reset SubBoard Re-power: power cycle the port
Factory: perform a factory reset to default values of the port
Re-power
151.BLINK ON AUDIO 1: No video glitch when the audio is connected or disconnected
0: There is a video glitch when the audio is connected or
disconnected
1
VGA Output Card
Parameter Description Default
42.Video Format Sets the video output format (VGA, RGBHV, RGsB, RGBS, YUV) VGA