Festo Параллельный захват HGPP - Manual (Page 19)

HGPP-...-A
Festo HGPP-...-A 0110a English
19
S Compare the limit values in these operat-
ing instructions with your current applica-
tion (e.g. for pressures, forces, torques,
masses, speeds, temperatures).
S Take into account the ambient conditions
at your location.
S Make sure that there is a correctly pre-
pared supply of compressed air.
S Please observe the national and/or local
technical regulations for your location.
S Remove the packing.
The packing is intended for recycling pur-
poses.
S Use dry and non-lubricated compressed
air for the entire service life of the prod-
uct.
An intermediate change to lubricated
compressed air will ruin the service life
lubrication of the product.
S Pressurize the complete system slowly
(e.g. with a safety start-up valve of type
HEL-... or HEM-...).
Uncontrolled movements of the actuators
will not then occur.
S Use the product in its original condition
without undertaking any modifications.
S Please observe the warnings and instruc-
tions on the product and in these operat-
ing instructions.
Fig. 4
Fig. 5
LF-... LR-...
Fig. 6
Fig. 7