Sony SVD1322BPXR User Manual
Page 56
Observe the following to avoid malfunctions and damage to your VAIO computer.
Place your VAIO computer gently on a flat surface to avoid a mechanical shock.
Be sure to turn off your VAIO computer before moving the computer. Moving the computer
that is turned on may cause a hard disk malfunction. Be sure to disconnect all cables
connected to the computer before moving it.
Do not drop or hit your VAIO computer. Even a slight shock or vibration may cause a hard
disk malfunction.
Do not place your VAIO computer in an unstable position.
Connecting a Power Source
Connect your VAIO computer to an AC power source.
Carefully read the precautions in
Notes on Using the Power Source
before connection.
1. Plug one end of the power cord (
) into the AC adapter (
).
2. Plug the other end of the power cord into an AC outlet (
).
3. Plug the cable from the AC adapter (
) into the DC IN port (
) on your VAIO
computer.
Note
Do not plug more than one device into the same AC outlet.
The shape of the AC adapter varies depending on the model you purchased.
Make sure that the power plug is firmly plugged into your VAIO computer.
Hint
You can purchase a power strip with a surge protector to help prevent damage to your VAIO
computer caused by sudden power surges (in an electrical storm, for example).
Charging the Battery Pack
The battery pack can be charged even while you are using your VAIO computer when the
computer is connected to a power source. The charging time may vary depending on operating
conditions.
1. Plug your VAIO computer into an AC outlet. (See
Hint