Sony VAIO Notebook PC (Packing Instructions) - Manual

VAIO Notebook PC
Packing Instructions
Last Revised: April 2005 1/2
In order to protect your PC during
transit, Sony Service Center has
provided you with packaging
material. Some assembly will be
required and after assembled the
packaging should look as shown on
photo#1.
#1
I
MPORTANT
! If plastic film is missing do not proceed with these instructions, call
customer support and request another box.
Place tray with the plastic film facing down. In a single move, fold and hold
small flaps in place (see photo #2) while rolling larger flap over small flaps (see
photo #3). Complete the folding of larger flap by locking the 2 tabs onto open
slot.
Turn tray, pre-fold and roll side flap towards inside of the tray (see photo #5),
ensure that both tabs are fully inserted on open slots as shown on photo #6. Rotate tray (see photo #4) and
repeat the folding process with
other side of the tray.
Fold and press down the end of tray
as shown on photo #7.
Completed tray should look as shown
on photo #9. Assemble the 2 nd tray
by following same steps (#2 thru
#8).
#2 #3
#4 #5 #6
#7 #8
#9
Fold flaps
(2) Trays
with plastic
(1) Box
Tab
Insert tabs in
place
Insert tabs in
place
Rotate tray (see photo #8) and
continue the folding process with
other side of tray.
Fold end of
insert