Sony VGN-UX180P - Manual

Cingular SIM Card
UX Series - Replacement Instructions
P/N 994642900 Rev. B 1/2
Step 1. Prepare the Computer.
CAUTION: Make sure the
computer is turned off, and the AC
Adapter is disconnected.
Place the computer on a protected
surface in upright position with the
left edge facing you.
Step 2. Locate the SIM Card.
The SIM Card is located behind the
plastic cover; left edge of your
computer.
With enclosed magnetic screwdriver
proceed to remove one (1) screw as
shown. Set screw aside.
Step 3. Remove Plastic Cover
LEFT EDGE
PLASTIC
COVER
REMOVE
SCREW
These easy instructions are intended to guide you through the replacement process.
9 To avoid electric shock please make sure product is turned off and AC Adaptor is disconnected
from the power source. Remove jewelry before you begin work to avoid scratching the surface of
your notebook computer.*
9 Place your notebook computer on a clean, stable and covered surface to avoid damage to the
computer's case.
*
9 Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o
Hold parts by the edges, away from exposed circuitry when possible.
o
Do not walk around excessively as this promotes static build-up.
9 The appearance of the electronic components shown in the illustrations may be different from the
components shipped. This slight difference does not affect the accuracy of these instructions.
* Sony is not responsible for any loss of data associated with your computer or any damage caused by
incorrect handling of the computer under these procedures. The terms of your Sony Limited Warranty
continue to apply.
IMPORTANT!
PLEASE READ BEFORE YOU START