The restricted command set – Sony ICD-BP150VTP User Manual
Page 194
C H A P T E R 1 5
Using a Handheld Recorder (Preferred edition only)
Dragon NaturallySpeaking User’s Guide
186
The restricted command set
When you are dictating into a recorder, most of the Dragon
NaturallySpeaking
®
voice commands cannot be used effectively because
they require that you see the results on a computer screen. The
restricted command set, however, can be used without visual feedback
when you are dictating into your recorder. These are the commands in
the restricted command set:
■
New Paragraph
■
New Line
■
Tab Key
■
Cap [word]
■
All Caps [word]
■
No Caps [word]
■
No Space [word]
■
Caps On/Caps Off
■
All Caps On/All Caps Off
■
No Caps On/No Caps Off
■
No Space On/No Space Off
■
Scratch That
■
Resume With
“Resume With” is particularly useful when you are using a recorder. It lets you
return to where you want to go within a recording if you misspeak or change your mind
after dictating a phrase. For more information, see “Going back as you dictate” on page
47.
Later, when you transcribe your recorded dictation, you can choose to
make Dragon NaturallySpeaking
®
ignore all commands except the
restricted command set. This prevents potentially damaging recognition
errors (for example, a phrase being incorrectly interpreted as the
command “Delete Previous 5 Paragraphs,” which would actually delete
the previous five paragraphs from your transcription). For more
information on how to do this, see the “The Advanced Settings dialog
box” on page 191.
TIP