Allied Telesis AT-S39 - Manual (Page 47)

Section II: Local and Telnet Management
47
Configuring
Management
Access
To configure the console timer, web access, SNMP access, and TFTP
server security features of the AT-S39 management software, perform
the following procedure:
1. From the Main Menu, type 5 to select System Config Menu.
The System Configuration Menu Figure 4 on page 42 is displayed.
2. To configure the console timer, type 3 to select Console Disconnect
Timer Interval and, when prompted, enter a value of from 1 to 60
minutes. The default is ten minutes.
For example, if you specify 2 minutes, the AT-S39 management
software automatically ends a management session if it does not
detect any activity from the local or remote management station
after 2 minutes.
3. To configure web browser access, type 4 to select Web Server Access
and, when prompted, type E to enable web access or D to disable
web access.
For example, if you disable web access, no one will be able to
manage the switch remotely using a web browser.
4. To configure SNMP access, type 5 to select SNMP Access and, when
prompted, type E to enable SNMP management access or D to
disable it.
For example, if you disable SNMP access, no one will be able to
manage the switch remotely using an SNMP management
program.
5. To configure TFTP access, type 6 to select TFTP Server Status and,
when prompted, type E to enable TFTP access or D to disable it.
If you disable TFTP server access, you cannot download
management software images switch to switch.
6. After you have made the desired changes, type S to select Save
Configuration Changes.
Your changes are immediately activated on the switch.