Allied Telesis AT-S39 - Manual (Page 191)

Section II: Local and Telnet Management
191
Displaying Switch Statistics
To display Ethernet statistics for an entire switch, perform the following
procedure:
1. From the Main Menu, type 7 to select Ethernet Statistics.
2. From the Ethernet Statistics menu, type 2 to select Display Module
Statistics.
The statistics for the port are displayed in the Display Module
Statistics window, shown in Figure 59.
Figure 59 Display Module Statistics Window
The information in this window is for viewing purposes only. The
statistics are defined below:
Total Count
Number of valid packets received and transmitted by the switch.
Transmit Packets
Number of packets transmitted from the switch.
Received Packets
Number of packets received by the switch.
Allied Telesyn Ethernet Switch AT-8024
Login Session: Manager
Display Module Statistics
Ethernet statistics for this module
TOTAL_COUNT ................. 0
TX_COUNT .................... 0
RX_COUNT .................... 0
RX_BRDCAST .................. 0
RX_MLTCAST .................. 0
RX_UNICAST .................. 0
RX_OVERFLOW ................. 0
CRC_ERROR ................... 0
UNDERSIZE ................... 0
OVERSIZE .................... 0
FRAGMENT .................... 0
PORT_IN_DISCARDS ............ 0
U - Update Display
C - Clear Module Statistics
R - Return to Previous Menu
Enter your selection?