Allied Telesis AT-S39 - Manual (Page 130)

AT-S39 User’s Guide
130
Example of Creating a Port-based VLAN
The following procedure creates the Sales VLAN illustrated in Port-
based Example 1 on page 117. This VLAN will be assigned a VID of 2 and
will consist of four untagged ports, Ports 1 to 4. The VLAN will not
contain any tagged ports. The VLAN traffic will not be mirrored on
another port, nor will it be sent to the switch’s CPU.
To create the example Sales VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 2 to select Virtual LAN Definitions.
3. From the Virtual LAN Definitions menu, type 1 to select Create a
VLAN.
4. Type 1 to select VLAN Name and enter “Sales”. Press Return.
5. Type 2 to select VLAN ID (VID) and enter “2”. This is the VID value for
the new VLAN. Press Return.
6. Type 4 to select Untagged Ports and enter “1-4”. These are the
untagged ports of the VLAN. Press Return.
7. Type C to select Create VLAN.
8. After the switch displays the prompt notifying you that it created the
VLAN, press any key.
9. Type S to select Save Configuration Changes.
The new Sales VLAN has now been created.