Allied Telesis AT-S39 - Manual (Page 217)

Section III: Web Browser Management
217
Activating the BOOTP and DHCP Services
For background information on BOOTP and DHCP, refer to the section
Activating the BOOTP and DHCP Services on page 40.
To activate or deactivate the BOOTP and DHCP protocols on the switch
from a web browser management session, perform the following
procedure:
1. From the Home Page, select Configuration.
The Configuration window is displayed with the System menu
option selected by default.
2. If the System menu option is not selected, select it and then select the
General tab.
The General Tab window is displayed, as shown in Figure 66 on
page 214.
3. In the BOOTP/DHCP options in the General tab window, click either
Enable or Disable.
Note
If you activated BOOTP/DHCP, the switch immediately begins to
query the network for a BOOTP or DHCP server. The switch
continues to query the network for its IP configuration until it
receives a response.