Allied Telesis AT-S39 - Manual (Page 141)

Section II: Local and Telnet Management
141
Displaying PVIDs and Port Priorities
The following procedure displays a window that lists the PVIDs for all the
ports on the switch. The window also contains the current priority queue
settings for each port. To display the PVID settings on the switch,
perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 3 to select Configure Port VLANS &
Priorities.
The Configure Port VLANS & Priorities window in Figure 42 on page
139 is displayed.
3. From the Configure Port VLANS & Priorities window, type 2 to select
Show Port VLANS & Priorities.
The Show Port VLANs and Priorities window is displayed. An example
of the window is shown in Figure 44.
Figure 44 Show Port VLANs and Priorities Window
The PVID column displays the current PVID value for each switch port.
Note
The Priority and Override Priority columns relate to the switch’s
Class of Service feature. For information, refer to Chapter 12, Class
of Service on page 162.
Allied Telesyn Ethernet Switch AT-8024
Login Session: Manager
Show Port VLANs & Priorities
Port PVID Priority Override Priority
---------------------------------------------
01 1 0 No
02 1 0 No
03 1 0 No
04 1 0 No
05 1 0 No
06 1 0 No
07 1 0 No
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?