Allied Telesis AT-S39 - Manual (Page 213)

Section III: Web Browser Management
213
Configuring an IP Address and Switch Name
Note
For guidelines on when to assign an IP address, subnet address, and
gateway address to an AT-8024 or AT-8024GB switch, refer to When
Does a Switch Need an IP Address? on page 35.
To set the basic switch parameters for an AT-8024 or AT-8024GB Fast
Ethernet switch, perform the following procedure:
1. From the Home Page, select Configuration.
The Configuration window is displayed with the System menu
option selected by default.
2. If the System menu option is not selected, select it and then select the
General tab.