Allied Telesis AT-S39 - Manual (Page 172)

AT-S39 User’s Guide
172
Displaying a List of Multicast Routers
A multicast router is a router that is receiving multicast packets from a
multicast application and transmitting the packets to host nodes. You
can use the AT-S39 software to display a list of the multicast routers that
are connected to the switch.
To display a list of the multicast routers, perform the following
procedure:
1. From the Main Menu, type 5 to select System Config Menu.
2. From the System Configuration Menu, type A to select Advanced
Configuration.
3. From the Advanced Configuration window, type 1 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration window in Figure 50 is
displayed.
4. From the IGMP Snooping Configuration window, type 7 to select
View Multicast Routers List.
The View Multicast Router List in Figure 51 is displayed.
Figure 52 View Multicast Routers List Window
The information in this window is for viewing purposes only. The
columns are defined below:
Port
The port on the switch where the multicast router is connected.
VLAN
The VID of the VLAN in which the port is an untagged member.
Router IP
The IP address of the multicast router.
Allied Telesyn Ethernet Switch AT-8024
Login Session: Manager
View Multicast Routers List
============================================
Port VLAN
Router IP
============================================
U - Update Display
R - Return to Previous Menu
Enter your selection?