Allied Telesis AT-S39 - Manual (Page 170)

AT-S39 User’s Guide
170
5 - Multicast Router Port(s)
Specifies the port on the switch to which the multicast router is
detected. You can let the switch determine this automatically by
selecting Auto Detect, or you can specify the port yourself by
entering a port number. To select Auto Detect, enter “0” (zero) for
this parameter. You can specify more than one port.
Note
Selections 6 and 7 in the menu are discussed later in this chapter.
4. After making the desired changes, type S to select Save Configuration
Changes.
Your changes are activated immediately on the switch.