Allied Telesis AT-S39 - Manual (Page 105)

Section II: Local and Telnet Management
105
Configuring RSTP
This section contains the following procedures:
❑ Configuring a Bridge’s RSTP Settings on page 105
❑ Configuring a Port’s RSTP Settings on page 107
Configuring a
Bridge’s RSTP
Settings
This section contains the procedure for configuring a bridge’s RSTP
settings.
Caution
The default RSTP parameters are adequate for most networks.
Changing them without prior experience and an understanding of
how RSTP works might have a negative effect on your network. You
should consult the IEEE 802.1w standard before changing any of the
RSTP parameters.
1. From the Spanning Tree Menu, type 4 to select RSTP Configuration.
The RSTP Menu in Figure 30 is displayed.
Figure 30 RSTP Menu
Allied Telesyn Ethernet Switch AT-8024
Login Session: Manager
RSTP Menu
The current protocol version is RSTP.
1 - Force Version ....... RSTP
2 - Bridge Priority ..... 32768
3 - Bridge Hello Time ... 2
4 - Bridge Forwarding ... 15
5 - Bridge Max Age ...... 20
6 - Bridge Identifier ... 00:30:84:52:11:11
7 - Root Bridge ......... 00:30:84:52:11:11
8 - Root Priority ......... 32768
P - RSTP Port Parameters
R - Return to Previous Menu
Enter your selection?