Allied Telesis AT-S39 - Manual (Page 223)

Section III: Web Browser Management
223
Pinging a Remote System
You can instruct the switch to ping a node on your network. This
procedure is useful in determining whether a valid link exists between
the switch and another device.
To ping a network device, perform the following procedure:
1. From the Home Page, select Monitoring.
2. From the Monitoring window, select the System menu option.
3. Select the Ping Client tab.
The window in Figure 69 is displayed.
Figure 69 Ping Client Window
4. Enter the IP address of the end node you want the switch to ping.
5. Click OK.
The results of the ping are displayed in a new window.
6. To stop the pinging, click OK.