Allied Telesis AT-S39 - Manual (Page 194)

AT-S39 User’s Guide
194
the same. What you can do is configure one of the AT-8000 Series
switches in your network, and then download its configuration file to the
other switches. This can save you the trouble of having to configure each
switch individually.
There are a several different ways for downloading and uploading files
onto a switch. They are:
❑ Local management session
One method for downloading or uploading files is from a local
management session on the switch using either Xmodem or TFTP.
The procedure for this is explains in Transferring Files from a
Local Management Session on page 196.
❑ Switch to switch
This procedure is useful if you have a large number of AT-8000
Series switches in your network. What you can do is upgrade the
software on one master switch and then instruct the master
switch to upgrade the software in the other switches in the same
subnet. This procedure is explained in Downloading Files Switch
to Switch on page 201.
❑ Management workstation
You can also use TFTP from a management workstation on your
network to upload and download files, as explained in
Downloading and Uploading Files using TFTP from a
Management Workstation on page 205.