Allied Telesis AT-S29 - Manual (Page 92)

Web-based Management
92
Spanning Tree
Configuration
The following figures and tables describe Bridge STA configuration.
When the Switch Becomes Root
Parameter Default Description
Usage Enabled Enable this parameter to participate in an STA
compliant network.
Priority 32,768 Device priority is used in selecting the root
device, root port, and designated port. The
device with the highest priority becomes the
STA root device. However, if all devices have
the same priority, the device with the lowest
MAC address will then become the root
device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value,
the higher the priority.
Usage:
Disabled
Priority: 32768
Switch
Hello Time:
Maximum Age:
Forward Delay:
2
20
15
seconds
seconds
seconds