Allied Telesis AT-S29 User Manual
Page 52
Using the System Configuration Program
52
You can use the Port Trunking Configuration screen to set up port trunks
as shown below:
Port Trunking Configuration
===========================
Trunk ID Status
Member List
1
2
3
4
-------
------
----------------------------------------
--
-----
Unit : -
Unit : -
Unit : -
Unit : -
--
-----
Port : -
Port : -
Port : -
Port : -
--
-----
Unit : -
Unit : -
Unit : -
Unit : -
--
-----
Port : -
Port : -
Port : -
Port : -
--
-----
Unit : -
Unit : -
Unit : -
Unit : -
--
-----
Port : -
Port : -
Port : -
Port : -
Trunk ID : 1
Trunk ID : 1
Member Unit : 1
Member Port : 1
[Show]
[More]
[Add]
[Delete]
[Enable]
[Disable]
Use
Parameter
Description
Trunk ID
Configure up to four trunks per switch.
Unit
Specifies a switch unit in the stack (1 to 4).
Port
Select from 2 to 4 ports per trunk.
[Show]
Displays trunk settings, where the first trunk listed is specified by “Trunk
ID.”
[More]
Scrolls through the list of configured trunks.
[Enable] [Disable]
Enables/disables the selected trunk.
[Add] [Delete]
Adds/deletes the port specified by Trunk ID / Member Unit / Member Port.