Allied Telesis AT-S29 - Manual (Page 46)

Using the System Configuration Program
46
Viewing the
Current Spanning
Tree
Configuration
The Spanning Tree Information screen displays a summary of the STA
information for the overall bridge or for a specific port or module. To
make any changes to the parameters for the Spanning Tree, use the
Spanning Tree Configuration menu.
Displaying the Current Bridge STA
The parameters shown in the following figure and table describe the
current Bridge STA Information.
Spanning Tree Information: Selection Menu
============================
STA Bridge Information ...
STA Port Information ...
Use or arrow keys to move. to select.
Spanning Tree Information: Bridge STA Information
============================
Priority : 65535
Hello Time (in seconds) : 2
Max Age (in seconds) : 20
Forward Delay (in seconds) : 5
Hold Time (in seconds)
: 1
Designated Root : 128.0000E8123456
Root Cost : 5
Root Port : 1
Reconfig Counts : 3
Topology Up Time : 0 day, 1 hr, 2min, 34 sec
Use or arrow keys to move. to select.