Allied Telesis AT-S29 - Manual (Page 37)

AT-S29 Management Software User’s Guide
37
Console Login
Configuration
Use the Management Setup: Console Login Configuration to restrict
management access based on specified user names and passwords, or
to set the invalid password threshold and timeout. There are two user
types, Administrator and Guest. Only the Administrator has write access
for parameters governing the SNMP agent. You should therefore assign
a user name and password to the Administrator as soon as possible, and
store it in a safe place. (If for some reason your password is lost, or you
cannot gain access to the System Configuration Program, contact your
Allied Telesyn distributor for assistance.) The parameters shown on this
screen are indicated in the following figure and table.
Console Login Configuration
=================
Password Threshold : 3
Lock-out Time (in minutes) : 0
User Type User Name Password
-------------------------------------------
1. ADMIN : admin
2. GUEST guest
3.
4.
5.
Use or arrow keys to move. other keys to make
changes.
Parameter Default Description
Password 3 Sets the password intrusion threshold which limits the number of
failed logon attempts. (Range: 0~65500)
Lock-out Time 0 The time (in seconds) the management console will be disabled,
due to an excessive number of failed logon attempts. (Range:
0~65535)
Admin
1
name:
admin
password
: null Administrator has access privilege of Read/Write for all screens.
Guest
1
name:
guest
password
: null Guest has access privilege of Read Only for all screens.
1. Passwords can consist of up to 11 alphanumeric characters and are not case sensitive.