Allied Telesis AT-S29 - Manual (Page 21)

21
Chapter 2
Using the System Configuration
Program
Login Screen
Once a direct connection to the serial port or a Telnet connection is
established, the login screen for the on-board configuration program
appears. If this is your first time to log into the configuration program,
then the default user names are "admin" and "guest," with no password.
The administrator has Read/Write access to all configuration parameters
and statistics, while the guest has Read Only access to the management
program.
You should define a new administrator password, record it and put it in a
safe place. Select Console Login Configuration from the Management
Setup Menu and enter a a new password for the administrator. Note that
passwords can consist of up to 11 alphanumeric characters and are not
case sensitive.
Note
Based on the default configuration, a user is allowed three attempts
to enter the correct password; on the third failed attempt the current
connection is terminated.
AT-8324SX version 1.12
V1.12 05-10-2000 (c) Copyright by Allied Telesyn
User Name :
Password :