Allied Telesis AT-S29 - Manual (Page 84)

Web-based Management
84
The default community strings are listed here.
Trap Managers
The following figure and table describe how to specify management
stations that will receive authentication failure messages or other trap
messages from the switch. Up to 5 trap managers may be entered.
Purpose Community String Privileges
General access public Read Only
Network
administrators private Read/Write
Network
management netman Read/Write
Parameter Description
Trap Manager IP Address IP address of the trap manager.
Trap Manager A community specified in the SNMP
Communities table.
Add/Remove Add/remove strings from the active list.
Enable Authentication
Traps Issue a trap message to specified IP trap
managers whenever authentication of an
SNMP request fails. (The default is
enabled.)
Trap Manager IP address:
Trap Manager Community String:
Current: New:
(none)
<
Remove
Enable Authentication Trap Generation: