Allied Telesis AT-S29 - Manual (Page 101)

AT-S29 Management Software User’s Guide
101
VLAN Static List
Use this screen to create or remove VLAN groups.
VLAN Static
Table
Use this screen to modify the settings for an existing VLAN. You can
add/delete port members for a VLAN from any unit in the stack, disable
or enable VLAN tagging for any port, or prevent a port from being
automatically added to a VLAN via the GVRP protocol. (Note that VLAN1
is fixed as an untagged VLAN containing all ports in the stack, and
cannot be modified via this screen.)
Parameter Description
Current Lists all the current VLAN groups created for this
system. Up to 16 VLAN groups can be defined. To
allow this switch to participate in external VLAN
groups, you must use the VLAN ID for the concerned
external groups.
New Allows you to specify the name and numeric identifier
for a new VLAN group. (The VLAN name is only used
for management on this system; it is not added to the
VLAN tag.)
Status Enables/disables the specified VLAN.
Add Adds a new VLAN group to the current list.
Remove Removes a VLAN group from the current list. If any
port is assigned to this group as untagged, it will be
reassigned to VLAN group 1 as untagged.
(none)
<
Remove
VLAN ID (1-2048)
Status
VLAN Name
Enable
Current New
Parameter Description
VID The ID for the VLAN currently displayed.
Range: 1-2048
Name A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters.
Status Enables/disables the specified VLAN.
Status
Name
Enable
RD
VLAN: 2 RD