Allied Telesis AT-S29 User Manual
Page 61
AT-S29 Management Software User’s Guide
61
802.1Q VLAN Static Table Information
Use this screen to create a new VLAN or modify the settings for an
existing VLAN. You can add/delete port members for a VLAN from any
unit in the stack, or prevent a port from being automatically added to a
VLAN via the GVRP protocol. (Also, note that all ports can only belong to
one untagged VLAN. This is set to VLAN 1 by default, but can be changed
via the 802. 1 Q VLAN Port Configuration screen.)
Parameter
Description
VID
The ID for the VLAN currently displayed.
Range: 1-2048
VLAN Name
A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters.
Status
Sets the current editing status for this VLAN as:
Not in Service, Destroy, or Active.
Unit
Stack unit.
Egress Ports
Set the entry for any port in this field to "1" to add it to the displayed VLAN,
or "O” to remove it from the VLAN.
Forbidden Egress
Ports
Prevents a port from being automatically added to this VLAN via GVRP.
[Show]
Displays settings for the specified VLAN.
[More]
Displays consecutively numbered VLANS.
[New]
Sets up the screen for configuring a new VLAN.
802.1Q VLAN Static Table Information
======================================
VID
VLAN Name
Status
--------------------------------------
Unit
Egress Ports
Forbidden Egress Ports
1.
111111111111 111111111111 1---000000000000 000000000000 0---
2.
------------ ------------ ---------------- ------------ ----
3.
------------ ------------ ---------------- ------------ ----
4.
------------ ------------ ---------------- ------------ ----
VID : 0
[Show]
[More]
[New]
Use