Allied Telesis AT-S29 - Manual (Page 85)

AT-S29 Management Software User’s Guide
85
Security Configuration
Use the Security Configuration screen to restrict management access
based on specified user names and passwords. The Administrator has
write access for parameters governing the SNMP agent. You should
therefore assign a user name and password to the Administrator as soon
as possible, and store it in a safe place. (If for some reason your password
is lost, or you can not gain access to the system’s configuration program,
contact Allied Telesyn for assistance.) The parameters shown on this
screen are indicated in the following figure and table.
Change Password
This password is for the system Administrator access, with access
privilege of Read/Write for all screens. Passwords can consist of up to 11
alphanumeric characters and are not case sensitive. (Default name:
admin; default password: null)
Old Password
New Password
Confirm Password