Allied Telesis AT-S29 - Manual (Page 24)

Using the System Configuration Program
24
802.1Q VLAN Base
Information Displays basic VLAN information, such as VLAN version number and
maximum VLANs supported.
802.1Q VLAN Current
Table Information Displays VLAN groups and port members.
802.1Q VLAN Static Table
Configuration Configures VLAN groups via static assignments, including setting
port members, or restricting ports from being dynamically added
to a port by the GVRP protocol.
802.1Q VLAN Port
Configuration Displays/configures port-specific VLAN settings, including PVID,
ingress filtering, and GVRP.
Port GARP Configuration
1
Configures settings used in multicast filtering.
Port GMRP Configuration
1
Configures GMRP multicast filtering.
Network Monitor Menu:
Port Statistics Displays statistics on network traffic passing through the selected
port.
RMON Statistics Displays detailed statistical information for the selected port such
as packet type and frame size counters.
Unicast Address Table Provides full address listing, as well as search and clear functions.
Multicast Address
Registration Table
1
-
IP Multicast Registration
Table Displays all the multicast groups active on this switch, including
multicast IP addresses and corresponding VLAN IDs.
Static Unicast Address
Table Configuration Used to manually configure host MAC address in the unicast table.
Static Multicast Address
Table Configuration
1
-
Restart System
Restarts system with options to use POST, or to retain factory
defaults, IP settings, or user authentication settings.
Exit Exits the configuration program.
1. Not implemented in this firmware release.
Menu Description