Allied Telesis AT-S29 - Manual (Page 19)

19
Note
Use the Network Configuration menu to specify the maximum
number of simultaneous Telnet sessions that are supported by the
system.
In-Band Network Connection
The on-board configuration program can be accessed using Telnet from
any computer attached to the network. The switch and stack can also be
managed by any computer using a Web browser (Internet Explorer 4.0
or above, or Netscape Navigator 4.0 or above), or from a network
computer using network management software.
Note
The on-board program only provides access to basic configuration
functions. To access the full range of SNMP management functions,
you must use SNMP-based network management software.