Allied Telesis AT-S29 - Manual (Page 90)

Web-based Management
90
STA Port Configuration
The parameters shown in the following figure and table are for port or
module STA Information (Port 1-12, Port 13-24, Expansion Slot 1 or
Expansion Slot 2).
Forward Delay The maximum time (in seconds) the root device
will wait before changing states (i.e., listening to
learning to forwarding).
Root The priority and MAC address of the device in
the spanning tree that this switch has accepted
as the root device.
Root Port The number of the port on this switch that is
closest to the root. This switch communicates
with the root device through this port. If there is
no root port, then this switch has been
accepted as the root device of the spanning
tree network.
Root Path Cost The path cost from the root port on this switch
to the root device.
Configuration
Changes The number of times the spanning tree has
been reconfigured.
Last Topology
Change The time since the spanning tree was last
reconfigured.
Parameter Description
Port Designated Cost Designated Bridge
32768.0030849A3B80 0 19 128.1 1
2
3
4
5
Port Status
Disabled
Disabled
Disabled
Disabled
Disabled
Forward Transitions
0
0
0
0
19
19
19
19
Designated Port
128.2
128.3
128.4
128.5
32768.0030849A3B80
32768.0030849A3B80
32768.0030849A3B80
32768.0030849A3B80