Allied Telesis AT-GS950/24 - Manual (Page 92)

Chapter 5: Virtual LANs
92
7. Click Apply.
8. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Modify a Port-
Based VLAN
To modify the name or port assignments of a port-based VLAN, perform
the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Port-Based VLAN.
The Port-Based VLAN Page is shown in Figure 29 on page 91.
4. In the VLAN Action column, click Modify next to the VLAN that you
want to change.
The Modify Port-based VLAN Page is displayed. See Figure 30.
Figure 30. AT-GS950/24 Modify Port-based VLAN
5. To change the name of the VLAN, type a new name in the VLAN
Name field.
Enter a value of up to 32 characters. For more information about this
field, refer to “VLAN Name” on page 77.
6. To assign ports to the VLAN, click on the port numbers labeled either
Group Member or Not Member.
7. Click Apply.
8. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Delete a Port-
Based VLAN
To delete a port-based VLAN, perform the following procedure:
1. From the main menu on the left side of the page, select Bridge.