Allied Telesis AT-GS950/24 - Manual (Page 185)

AT-GS950/24 Web Interface User Guide
185
Profile Action
The Create Profile Action page defines the priority parameters for policing
on DSCP (layer 3) and/or class of service (layer 2).
Note
You must enter a Profile Index on this page even if you do not define
the Policed-DHCP and Policed-CoS parameters because the
Profile Index is a required parameter for creating both the In-Profile
and Out-Profile Actions. Refer to “Create In-Profile Action” on
page 189 and “Create Out-Profile Action” on page 193 for more
information.
You can create, modify or delete a Profile Action by following the
procedures in the following sections:
 “Create Profile Action,” next
 “Modify Profile Action” on page 186
 “Delete Profile Action” on page 187
Create Profile
Action
To create a profile action, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Profile Action.
The Create Profile Action page is displayed in Figure 62.
Figure 62. Create Profile Action Page