Allied Telesis AT-GS950/24 - Manual (Page 281)

AT-GS950/24 Web Interface User Guide
281
9. Select one of the following choices for the Priv-Protocol field:
DES - The DES encryption scrambles the SNMP data so that
outside observers are prevented from seeing the data content.
none - No encryption is selected for the SNMP data.
Note
If you specify a privacy password, the privacy protocol is set to DES
and you must also specify an authentication protocol and password.
10. Click Add.
The new User Name and Group Name are displayed on the User/
Group page.
11. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Modify SNMPv3
User and Group
Names
If you need to modify an entry in the SNMP User/Group page, you must
first delete the entry and then re-enter it. For information about how to
delete an entry in this table, see “Delete SNMPv3 User and Group Names”
on page 281. For information about how to create a new entry in this table,
see “Create SNMPv3 User and Group Names” on page 280
Delete SNMPv3
User and Group
Names
This procedure explains how to delete and entry on the SNMP User/Group
page.
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select SNMP User/Group.
The SNMP User/Group Page is displayed. See Figure 95 on page 269.
3. In the Action column of the table, click Delete for the User Name and
Group Name that you want to remove.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.