Allied Telesis AT-GS950/24 - Manual (Page 203)

AT-GS950/24 Web Interface User Guide
203
Figure 76. Modify Policy Page
4. Change the parameters as required.
Note
See “Create Policy” on page 200 for the definitions of each
parameters.
5. Click Apply.
The modified Policy entry is displayed in the table at the bottom of the
page of the Create Policy page.
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Delete Policy
To delete a Policy entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.