Allied Telesis AT-GS950/24 - Manual (Page 261)

AT-GS950/24 Web Interface User Guide
261
Global Configuration
Perform the following procedures to configure the Global parameters for
LLDP:
 “Enable/Disable LLDP”
 “System Information” on page 262
 “Port States” on page 263
Enable/Disable
LLDP
To enable or disable the LLDP feature, perform the following procedure:
1. From the main menu on the left side of the page, click the LLDP folder.
The LLDP folder expands.
2. From the LLDP folder, select LLDP Global Settings
A partial view of the AT-GS950/24 LLDP Global Settings Page is
displayed. See Figure 93.
Figure 93. AT-GS950/24 LLDP Global Settings Page