Allied Telesis AT-GS950/24 - Manual (Page 189)

AT-GS950/24 Web Interface User Guide
189
In-Profile Action
The Create In-Profile Action page allows you to specify a Profile Action’s
Permit or Deny privilege for packets in the ingress queue.
Note
A Profile Action Index is required to create an In-Profile Action.
See “Create Profile Action” on page 185 for more information.
You can create, modify or delete an In-Profile Action by following the
procedures in the following sections:
 “Create In-Profile Action,” next
 “Modify In-Profile Action” on page 191
 “Delete In-Profile Action” on page 192
Create In-Profile
Action
To create an in-profile action, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select In-Profile Action.
The Create In-Profile Action page is displayed in Figure 65.
Figure 65. Create In-Profile Action Page
3. Enter a number in the In-Profile Action Index field. The Index must be
a unique number within the range of 1 - 65535. This field is mandatory.
Note
The In-Profile Action Index is a required parameter when you create
a Policy. See “Create Policy” on page 200 for more information.