Allied Telesis AT-GS950/24 - Manual (Page 123)

AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
123
Basic STP and RSTP Configuration
To configure the basic STP and RSTP settings, perform the following
procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select the Spanning Tree folder.
The Spanning Tree folder expands.
3. From the Spanning Tree folder, select the RSTP folder.
The RSTP folder expands.
4. Form the RSTP folder, select RSTP.
The Rapid Spanning Tree Configuration Page is displayed. See Figure
40.
Figure 40. Rapid Spanning Tree Configuration Page