Vlan setting, Create vlan setting – Allied Telesis AT-GS950/24 User Manual

Page 233

AT-GS950/24 Web Interface User Guide

233

VLAN Setting

You can create and delete DHCP Snooping VLAN settings by following the
procedures in these sections:







Create VLAN

Setting

To define a VLAN that will be a part of the DHCP Snooping feature,
perform the following procedure:

1. From the main menu on the left side of the page, select DHCP

Snooping.
The DHCP Snooping folder expands.

2. From the DHCP Snooping folder, select VLAN Settings.

The VLAN Settings page is displayed. See Figure 84.

Figure 84. DHCP Snooping VLAN Settings Page.

3. In the VLAN ID field, enter a VLAN ID that has been pre-defined. See

4. Click Add.

The new VLAN ID entry is displayed in the table on the page.

5. If you find more than one VLAN ID to configure for DHCP Snooping,

enter them one at a time by following steps 3 and 4.

6. From the main menu on the left side of the page, select Save

Configuration to Flash to permanently save your changes.